Surface Cartridges (Pleat)

Pleat polypropylene membrane cartridges with porosity gradient, absolute filtering range for final filtration of liquids and gases.

MICROPLEAT – PA

Characteristics

  • Pore: Absolute
  • Filter Material: Filter Material: Pleat polypropylene membrane cartridges with porosity gradient, absolute filtering range, electronically welded, with external net protection, terminals and polypropylene.
  • Core: Polypropylene
  • Plain gaskets and O-ring: Silicone.
  • Maximum operational differential pressure (filtration way): 4 bar at 65°C.
  • Maximum working temperature: 65°C.
  • Chemistry Resistance: pH 1­14; tolerates virtually all acids and alkalis, resistant to alcohols, esters and oils, air and non­corrosive gases, galvanizing baths, radioactive photochemical solutions.
  • Manufactured under GMP standards, comply with standards for USP Class VI plastics and USP on toxicity tests. Suitable for food products. ISO 9002 Certificate.

Uses:
In beverages: pre­filter fining and filtration of water, wine, beer and soft drinks. Approved by international breweries as a filter trap.
Pharmaceuticals: critical liquid filtration, filtration of liquids and viscous syrups, cosmetics, perfumes.
Chemistry: Filtration solvents, resins, lacquers, photographic emulsions and galvanized baths.
Environment: Elimination of air particles and gases.

MICROWINE - PES

Filter Cartridges for wines, with polypropylene and polyethersulfone support membrane.

Characteristics

  • Pore: Absolute
  • Filter Material: pleat polyethersulfone membrane (PES), totally hydrophilic, reduced protein absorption o, without its surfactant moisturizers and materials that could alter the taste.
  • Core: Polypropylene.
  • Joints: Silicone.
  • Maximum operational differential pressure (filtration way): 80 psid (5.4 bar) at 24° C.
  • Maximum operational differential pressure (opposite filtration way): 50 psid (3.4 bar) at 24°C.
  • Maximum working temperature: 80°C.
  • Sterilization:
    Autoclave at 121°C.
    Steam at 135°C.
  • Chemistry Resistance: pH 1­14, resistant to acids and alkalis, alcohols, solvents, cleaning solutions weakly oxidants. Not compatible with strong oxidizing agents (e.g. 98% sulfuric acid ), fuming nitric acid or hydrobromic acid, chlorinated hydrocarbons and aromatic solvents such as benzene and toluene.
  • Bacteria Retention:
    • 0.45 µm: retains L. oenii and L. brevis.
    • 0.65 µm: retains S. cerevisiae and P. damnosus.
  • All components made under the USP XXIII­Class VI­121ºC requirements for plastics.
  • Heat­welded to guarantee integrity and reduce extractables.
  • Manufactured in a Class 10,000 clean area under ISO 9001 standards and manufacturing and tracking control in accordance with FDA GMP for medical systems, pre­washed with demineralized water and individually controlled in its entirety.

Uses:
Wine filtration.
Beer filtration.
Spirits filtration.
Mineral water filtration.
Sparkling wine filtration.


Microwine-PES-30

MICROTEF - PTFE

PTFE membrane filter cartridge suitable for pharmaceutical use (APR - Aerosol Bacterial retentive).This method is the best emulator action for removing bacteria filter used as an air vent.

Characteristics

  • Pore: Absolute
  • Filter Material: PTFE highly­hydrophobic membrane.
  • Structure: membrane support, external protection net, terminals and polypropylene core.
  • Joints: Silicone.
  • Maximum operational differential pressure (filtration way): 5.5bar (24º).
  • Maximum operational differential pressure (contrary filtration way): 3.4bar (24º)
  • Sterilization:
    Suitable for 100 cycles of steam, 1 hour at 145°C.
  • Bacteria retention: tested with a cargo of 107 CFU of Brevundimonas diminuta provides a sterile filter after each of the 100 cycles through steam sterilization at 145°C.
  • Air flow (at 24ºC 1 bar entry pressure): 22.6slpm/mbar
  • Manufactured by controlling their integrity 100% and packaged in a compound Class 10000 clean certificate in accordance with FDA standards to comply with medical systems GMP.
  • All components are manufactured under the USP XXIII­Class VI­121�C requirements for plastics.

Uses:
Supplies of sterile gas.
Filtration sterile gas (N2, CO2, etc.).
Pharmaceutical vent.
Filtration of aggressive liquids.
Validated to provide sterile air.
Filtration of steam.
Fermenter venting.


Microtef-PTFE

MICROFLOW – B

Absolute filter cartridge. Polyethersulfone membrane, validated for biological products.

Characteristics

  • Pore: Absolute
  • Filter Material: polyethersulfone (PES) membrane, anisotropic mirrored folded structure, totally hydrophilic, reduced absorption of protein, without its surfactant and materials moisturizers.
  • Core and terminals: Polypropylene.
  • Joints: Silicone (Standard).
  • Maximum pressure: 5.5 bar at 24ºC filtration way.
  • Differential work: 3.4 bar at 24ºC opposite filtration way.
  • Maximum working temperature: 80° C.
  • Sterilization:
    Autoclave
    Steam (135°C).
  • Bacteria retention: Complies with bacteria retention standards as burden test until bacteria reaches 107/cm2.
  • Organ Retention:
    • Cartridges of 0.2 µm, Brevundimonas diminuta.
    • Cartridges of 0.45 µm: Serratia marcescens.
  • All components made under the USP XXIII­Class VI­121ºC requirements for plastics.
  • Heat­welded to ensure integrity and reduce extractables.
  • Manufactured by controlling their integrity 100% and packaged in a compound Class 10000 clean certificate in accordance with FDA standards to comply with medical systems GMP.

Uses:
Filtration of pharmaceuticals, culture media, parenteral solutions, vaccines, serums or water for processing.

Microflow B30

MICROFLOW – G

Absolute filter cartridge. Polyethersulfone membrane for general use.

Characteristics

  • Pore: Absolute
  • Filter Material: polyethersulfone (PES) membrane folded, anisotropic mirrored structure, totally hydrophilic, reduced absorption of protein, without its surfactants and materials moisturizers.
  • Core and terminals: Polypropylene.
  • Joints: Silicone (Standard).
  • Maximum pressure: 5.5 bar at 24ºC filtration way.
  • Differential work: : 3.4 bar at 24ºC reverse filtration way.
  • Maximum working temperature: 80°C.
  • Sterilization:
    Autoclave
    Steam (135°C).
  • Bacteria retention: Complies with bacteria retention standards as burden test until bacteria reaches 107/cm2..
  • Organ Retention:
    • Cartridges of 0.2 µm, Brevundimonas diminuta.
    • Cartridges of 0.45 µm: Serratia marcescens.
  • All components made under the USP XXIII­Class VI­121�C requirements for plastics.
  • Heat­welded to ensure integrity and reduce extractables.
  • Manufactured by controlling their integrity 100% and packaged in a compound Class 10000 clean certificate in accordance with FDA standards to comply with medical systems GMP.

Uses:
Filtration of water for industrial use (plant, laboratory, rinse containers, etc.) and drinking water (or mineral ore).

Microflow B30

MICROFLOW – P

Absolute filter cartridge. Polyethersulfone membrane, validated for biological products.

Characteristics

  • Pore: Absolute
  • Filter Material: polyethersulfone membrane (PES) folded anisotropic mirrored structure, totally hydrophilic, reduced absorption of protein, without its surfactants and materials moisturizers.
  • Core and terminals: Polypropylene.
  • Joints: Silicone (Standard).
  • Maximum pressure: 5.5 bar at 24ºC filtration way.
  • Differential work: : 3.4 bar at 24ºC contrary filtration way.
  • Maximum working temperature: 80°C.
  • Sterilization:
    Autoclave
    Steam (135°C).
  • Bacteria retention:Complies with bacteria retention standards as burden test until bacteria reaches 107/cm2.
  • Organ Retention:
    • Cartridges of 0.2 µm, Brevundimonas diminuta.
    • Cartridges of 0.45 µm: Serratia marcescens.
  • All components made under the USP XXIII­Class VI­121ºC requirements for plastics.
  • Heat­welded to ensure integrity and reduce extractables.
  • Manufactured by controlling their integrity 100% and packaged in a compound Class 10000 clean certificate in accordance with FDA standards to comply with medical systems GMP.



Select Product Code:

Microflow B30